Feed Bander ZFB
The mobile banding machine on 4 castors is equipped with an integrated feed pusher, limit stops at the banding section and with a large reel stand including store room for reels with coated kraft paper tape or polypropylene foil.
A very efficient and quick mode of operation is achieved by just inserting the piles. The banded piles are pushed towards the delivery by inserting and feeding new piles.
If automatic feeding of product piles is not possible due to their nature, it is possible to feed the piles manually from the delivery side after having switched-off the feed pusher.
Standard for Single or double banding. With Options: Pneumatic compression of piles and roller delivery.
Adjustments:
- Activation of operating cycle: automatically by sensor, manually by push-button or by foot pedal
- Time delay of feed pusher in automatic mode (for a better alignment of the pile)
- Different widths of packages
- Position of tape on the package
- Tape tension
- Selection of single or double banding (1 or 2 working steps respectively)
Specifications
Feed Bander |
|
ZFB 36-30 |
||
|---|---|---|---|---|
Banding material |
|
Coated kraft paper, Polypropylene foil (PP 80 µm) |
||
Tape widths |
mm |
30 |
||
Reel length: Kraft paper |
m |
800 |
||
Reel length: PP foil |
m |
1200 |
||
Output of machine |
strokes/min |
14-18 |
||
Measurement of product, min / max:: |
|
|||
Length |
mm |
|
||
Width |
mm |
|
||
Height |
mm |
ca. 5* -180 |
||
Measurement of machine, standard equipment |
||||
Length |
mm |
1130 |
||
Width |
mm |
735 |
||
Height |
mm |
1215 |
||
Measurements of machine, with options (pile compression, roller delivery) |
||||
Length |
mm |
1740 |
||
Width |
mm |
735 |
||
Height |
mm |
1480 |
||
Weight |
||||
Standard equipment |
kg |
142 |
||
with Options |
kg |
157 |
||
