GW 8000P-DS
- Auto feed PNEUMATIC numbering system with 2 parallel shafts
- Floor model
- Programmable
- Single head
- Single accessory holder with 12 TPI perf blade and score blade
- Two drive unit mount blocks on each shaft
- (Cannot be upgraded to GW12000 or AIRFEED)
- Options Available:
- Additional pneumatic drive unit with standard rev. head (max 4)
- Additional pneumatic drive unit w/heavy duty standard rev. head
Specifications
GW 8000P-DS
Electrical: |
115V/60Hz/5A or 230V/50Hz/3A |
Speed: |
8,000 sheets per hour,variable |
Maximum Stock Size: |
18” x 18” (45.7cm x 45.7cm) |
Minimum Stock Size: |
3”W x 5”L (7.6cm x 12.7cm) |
Stock Weight: |
12# 12 point (45-300gsm) |
Impression Control: |
Electronic variable, crash up to 10 parts carbonless |
Feeder: |
Friction |
Dimensions: |
|
Length: |
44” (1.12m) |
Width: |
27” (0.69m) |
Height: |
46” (1.17m) |
Weight: |
125 lbs. (57kg) |
Floor Model: |
Standard |
Drive Unit Type: |
Pneumatic |
Maximum Number of Heads: |
4 |
Numbering or Creasing Positions: |
100 |
Job Memory: |
100 |
Head Rotation: |
Lockable throughout 360 |
Repeat Action: |
Consecutive, 1x, 2x, 3x, 4x |
Numbering Heads: |
Standard 6 digit reverse head |
|
Optional 8 digit condensed head |
|
No. and letter prefix available |
Inking System: |
Inkpad with reservoir |
Perf Blade Options: |
2,4,6,8,12,16 teeth per inch |
Microperf Options: |
42 or 72 teeth per inch |
Scoring Options: |
Standard wide or narrow |
Slitting Blade: |
Optional |
Strike Perf: |
Optional |
Register Board: |
Optional |
Conveyor Outfeed: |
Optional |
Air Feed: |
N/A |
Drive Unit with Reverse Head: |
1 |
Accessory Holder: |
1 |
12 tpi Perf Blade |
1 |
Score Blade |
1 |
Specifications Subject to Change without Notice
