|
The Standard Horizon SpeedVAC 100 collating system is the most productive flat
sheet collating system currently available. From a single tower all ten stations are capable of collating up to 9000 straight
stacked sets per hour. As the number of bins used increases the SpeedVAC 100 continues to out produce most competitive systems
by a factor of 2:1, or in some cases 3:1. This productivity is provided
by a unique pulsed rotary vacuum feeding wheel located in each station. Similar to large pile feed folding equipment,this
feeding system is capable of high speeds while maintaining the ability to feed the widest variety of stocks with little or
no operator adjustments. The Standard Horizon SpeedVAC 100 collating system
can be configured from ten up to sixty feeding stations. The system is modular, and additional towers of ten stations can
be added at any time to the initial “A” tower. Simple programming for non-stop productivity is controlled from
two buttons on the touch screen. Programming provides divide by two or dual cover feeding or a combination of the two programs.
Simple and productive. | Specifications | | | Number of Stations | 10, 20,
30, 40, 50 or 60 stations (up to six towers of 10 stations each). | | Paper Weight Range | 11 lb. up to 12 pt. cover (and higher
depending on grain and stock). | | Bin Pile Height | 2.2" | | Error Detection | Miss,
double, jam and bin-empty (opacity photocell), all errors indicated regardless of speed or programming. | | Production Speed | Up to 4,250 booklets/hour.
Up to 9,720 sets/hour straight-stacked.
Up to 5,400 sets/hour
offset-stacked. | | Sheet Size (Min. /Max.) | 4.75"1
x 5.8" to 14" x 20" with
narrow sheet guide. | | Power Requirements/Consumption | 220 V AC, 60 HZ, Single Phase
/ 1,700 W, 9 amps. | | Weight/Dimensions | VAC-100 Towers
- 639.5 lbs. / 26" L x 32" W x 77" H. |
The Standard Horizon SpeedVAC 100 is
capable of feeding all towers in the system to the left for bookletmaking into the stitching/folding unit, or all towers to
the right into an offset stacker for collation. Any combination of towers can feed in either direction, at the same time,
with no slow down in productivity. The Standard Horizon Speed VAC 100 collating
towers are equipped with a touch sensitive screen for easy access and monitoring of all machine functions. There are five
main screens. The collating towers have the ability to store up to 9 different jobs in memory for a simple recall of common
jobs as well as serving as a job recovery in case of an interruption on a long run. The Standard Horizon Speed VAC 100 collating system finishing accessories include four different stackers for collation,
four stitching units and variety of face trimming devices. The Standard
Horizon SPF 20A stitching/folding unit is capable of completely automatic set-up to a new sheet size within twenty seconds.
The operator simply selects the finishing style and flat sheet size, and the SPF-20A does all the rest. It also drives the
FC-20A face trimmer if so equipped.
|
